盗墓笔记有声小说,如何发布网络小说,小说排行榜

←

→

10G-BIDI-40KM-1270nm-1330nm-萬兆單纖光模塊

在單模光纖中傳輸距離達到40千米

全國咨詢熱線：
0755-86654236 /

聯系我們 在線客服

掃一掃關注我們

規格書下載產品詳情

產品介紹

產品特性

熱插拔SFP封裝

單纖LC接口

在單模光纖中傳輸距離達到40千米

內置數字診斷功能

符合SFP MSA標準

+3.3V單供電電壓

符合RoHS 6標準

工作溫度范圍：

商業級：0 to +70°C

工業級：-40 to +85°C

兼容性強，適用于國內外各品牌交換機

產品應用

萬兆以太網

光纖網絡OC-192 同步數字體系STM-64

萬兆交換機互聯

萬兆路由/服務器光鏈接

其他萬兆光傳輸系統

光學參數

Parameter	Symbol	Min.	Typical	Max.	Unit	Note
Transmitter Section:
Center Wavelength	λt	1260	1270	1280	nm
Side Mode Suppression Ratio	SMSR	30	-	-	dB
Average Optical Power	Pavg	0	0	+5	dBm
Laser Off Power	Poff	-	-	-30	dBm
Extinction Ratio	ER	3.5	-	-	dB
Transmitter Dispersion Penalty	TDP	-	-	3.2	dB
Relative Intensity Noise	Rin	-	-	-128	dB/Hz	12dB reflection
Optical Return Loss Tolerance		-	-	12	dB
Receiver Section:
Center Wavelength	λr	1320		1340	nm
Receiver Sensitivity in Average Power	Sen			-15.0	dBm	1
Vertical eye closure penalty		2.2	-	-	dB	3
Los Assert	LosA	-30	-	-	dBm
Los Dessert	LosD	-	-	-16.0	dBm
Los Hysteresis	LosH	0.5	-	-	dB
Overload	Pin	-	-	0.5	dBm	1
Receiver Reflectance		-	-	-12	dB
Stressed eye jitter		0.3	-	-	UIp-p	2
Receive electrical 3dB upper cutoff frequency		-	-	12.3	GHz
Receiver power (damage)		-	-	1.5	dBm

Parameter	Symbol	Min.	Typical	Max.	Unit	Note
Transmitter Section:
Center Wavelength	λt	1260	1270	1280	nm
Side Mode Suppression Ratio	SMSR	30	-	-	dB
Average Optical Power	Pavg	0	0	+5	dBm
Laser Off Power	Poff	-	-	-30	dBm
Extinction Ratio	ER	3.5	-	-	dB
Transmitter Dispersion Penalty	TDP	-	-	3.2	dB
Relative Intensity Noise	Rin	-	-	-128	dB/Hz	12dB reflection
Optical Return Loss Tolerance		-	-	12	dB
Receiver Section:
Center Wavelength	λr	1320		1340	nm
Receiver Sensitivity in Average Power	Sen			-15.0	dBm	1
Vertical eye closure penalty		2.2	-	-	dB	3
Los Assert	LosA	-30	-	-	dBm
Los Dessert	LosD	-	-	-16.0	dBm
Los Hysteresis	LosH	0.5	-	-	dB
Overload	Pin	-	-	0.5	dBm	1
Receiver Reflectance		-	-	-12	dB
Stressed eye jitter		0.3	-	-	UIp-p	2
Receive electrical 3dB upper cutoff frequency		-	-	12.3	GHz
Receiver power (damage)		-	-	1.5	dBm

HD-SFP+/10G-BIDI-40U:(1270nm TX/1330nm RX)

Optical Parameters

HD-SFP+/10G-BIDI-40D:( 1330 TX/1270 nm RX )

Parameter	Symbol	Min.	Typical	Max.	Unit	Note
Transmitter Section:
Center Wavelength	λt	1320	1330	1340	nm
Side Mode Suppression Ratio	SMSR	30	-	-	dB
Average Optical Power	Pavg	0	0	+5	dBm
Laser Off Power	Poff	-	-	-30	dBm
Extinction Ratio	ER	3.5	-	-	dB
Transmitter Dispersion Penalty	TDP	-	-	3.2	dB
Relative Intensity Noise	Rin	-	-	-128	dB/Hz	12dB reflection
Optical Return Loss Tolerance		-	-	12	dB
Receiver Section:
Center Wavelength	λr	1260		1280	nm
Receiver Sensitivity in Average Power	Sen			-15.0	dBm	1
Vertical eye closure penalty		2.2	-	-	dB	3
Los Assert	LosA	-30	-	-	dBm
Los Dessert	LosD	-	-	-12	dBm
Los Hysteresis	LosH	0.5	-	-	dB
Overload	Pin	-	-	0.5	dBm	1
Receiver Reflectance		-	-	-12	dB
Stressed eye jitter		0.3	-	-	UIp-p	2
Receive electrical 3dB upper cutoff frequency		-	-	12.3	GHz
Receiver power (damage)		-	-	1.5	dBm

Notes:

1.Average optical power shall be measured using the methods specified in TIA/EIA-455-95.

2.Receiver sensitivity is informative. Stressed receiver sensitivity shall be measured with conformance test signal for BER =1x 10-12 .

3.Vertical eye closure penalty and stressed eye jitter are the test conditions for measuring stressed receiver sensitivity. They are not the required characteristic of the receiver.

4.Power budget is defined as the different between the Rx sensitivity and the Tx output power of the interface.

5.Path penalty is intended as the power penalty of the interface between back-to-back and the maximum applied dispersion.

引腳定義

PIN	Logic	Symbol	Name / Description	Note
1		VeeT	Module Transmitter Ground	1
2	LVTTL-O	TX_Fault	Module Transmitter Fault
3	LVTTL-I	TX_Dis	Transmitter Disable; Turns off transmitter laser output
4	LVTTL-I/O	SDA	2-Wire Serial Interface Data Line	2
5	LVTTL-I	SCL	2-Wire Serial Interface Clock	2
6		MOD_DEF0	Module Definition, Grounded in the module
7	LVTTL-I	RS0	Receiver Rate Select
8	LVTTL-O	RX_LOS	Receiver Loss of Signal Indication Active LOW
9	LVTTL-I	RS1	Transmitter Rate Select (not used)
10		VeeR	Module Receiver Ground	1
11		VeeR	Module Receiver Ground	1
12	CML-O	RD-	Receiver Inverted Data Output
13	CML-O	RD+	Receiver Data Output (not used)
14		VeeR	Module Receiver Ground	1
15		VccR	Module Receiver 3.3 V Supply
16		VccT	Module Receiver 3.3 V Supply
17		VeeT	Module Transmitter Ground	1
18	CML-I	TD+	Transmitter Non-Inverted Data Input
19	CML-I	TD-	Transmitter Inverted Data Input
20		VeeT	Module Transmitter Ground	1

SFP+ Module PIN Definition

Notes:

1. Module ground pins GND are isolated from the module case.

2. Shall be pulled up with 4.7K-10Kohms to a voltage between 3.15V and 3.45V on the host board.

訂購信息

型號/Part Number	產品描述/Product Description
HD-SFP+/10G-BIDI-40U	1270nm TX/1330nm RX, 10Gbps, 40Km, 10Gbps SFP+ Bi-Directional Transceiver with Single LC Receptacle, 0oC ~ +70oC .
HD-SFP+/10G-BIDI-40D	1330nm TX/1270nm RX, 10Gbps, 40Km, 10Gbps SFP+ Bi-Directional Transceiver with Single LC Receptacle, 0oC ~ +70oC .
HD-SFP+/10G-BIDI-40UI	1270nm TX/1330nm RX, 10Gbps, 40Km, 10Gbps SFP+ Bi-Directional Transceiver with Single LC Receptacle, -40oC ~ +85oC .
HD-SFP+/10G-BIDI-40DI	1330nm TX/1330nm RX, 10Gbps, 40Km, 10Gbps SFP+ Bi-Directional Transceiver with Single LC Receptacle, -40oC ~ +85oC .