點擊查看大圖
規格書下載產品詳情
產品介紹
產品特性
1、熱插拔SFP封裝
2、雙纖LC接口
3、在多模光纖中傳輸距離達到300米
4、內置數字診斷功能
5、符合SFP MSA標準
6、+3.3V單供電電壓
7、符合RoHS 6標準
8、工作溫度范圍：
商業級：0 to +70°C
工業級：-40 to +85°C
9、兼容性強，適用于國內外各品牌交換機
產品應用
1、萬兆以太網
2、光纖網絡OC-192 同步數字體系STM-64
3、萬兆交換機互聯
4、萬兆路由/服務器光鏈接
5、其他萬兆光傳輸系統
光學參數
Optical transmitter Characteristics | ||||||
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Launched Power (avg.) | POUT | -7.3 | -1 | dBm | ||
Optical Power OMA | POMA | -1.5 | dBm | 1 | ||
Operating Wavelength Range | λC | 840 | 850 | 860 | nm | |
Spectral Width (RMS) | ?λ | 0.45 | nm | |||
Extinction Ratio | ER | 3 | dB | 2 | ||
Transmitter and Dispersion Penalty | TDP | 3.2 | dB | |||
Optical Output Power after TX Disable | PDIS | -30 | dBm | |||
Relative Intensity Noise | RIN | -128 | dB/Hz | |||
Optical Return Loss Tolerance | ORL | 12 | dB | |||
Tx Jitter | Txj | Per IEEE 802.3ae requirements | ||||
Optical Receiver Characteristics | ||||||
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Wavelength Range | λC | 840 | 850 | 860 | nm | |
Receiver Sensitivity (OMA) | RSENS1 |
-11.1 | dBm | 3 | ||
Stressed Receiver Sensitivity (OMA) | RSENS2 |
-7.5 | dBm | 3 | ||
Optical Power Input Overload | Pin-max | +0.5 | dBm | |||
LOS De-Assert | LOSD | -13 | dBm | 3 | ||
LOS Assert | LOSA | -30 | dBm | 3 | ||
LOS Hysteresis | 0.5 | dB | 4 | |||
Receiver Reflectance | Rr | -12 | dB | |||
Notes:
1.Per Tradeoff Table 52.8, IEEE 802.3ae 2005
2.For the measurements, the device was driven with 231-1 PRBS pattern.
3.Measured with a PRBS 231-1 test pattern, @10.3125Gbps,, BER<10-12
4.The LOS Hysteresis minimizes ‘chatter’ on the output line. In principle, Hysteresis alone does not guarantee chatter-free operation.
引腳定義
The SFP+ modules are hot-pluggable. Hot pluggable refers to plugging in or unplugging a module while the host board is powered. The SFP+ host connector is a 0.8 mm pitch 20 position right angle improved connector specified by SFF-8431, or stacked connector with equivalent electrical performance. SFP+ module contacts mates with the host in the order of ground, power, followed by signal as illustrated by Figure 1 and the contact sequence order listed in Table 1.
Figure 1 SFP+ Pad Assignment Top View
Pin No | Symbol | Name/Description | Power Seq. | Note |
1 | VeeT | Transmitter Ground | 1st | 1 |
2 | TX_Fault | Transmitter Fault | 3rd | 2 |
3 | TX_Disable | Transmitter Disable | 3rd | 3 |
4 | SDA | 2-Wire Serial Interface Data Line | 3rd | 4 |
5 | SCL | 2-Wire Serial Interface Data Line | 3rd | 4 |
6 | Mod_ABS | Module Absent, Connect to VeeT or VeeR in Module | 3rd | 5 |
7 | RS0 | No connection required | 3rd | 6 |
8 | RX_LOS | Receiver Loss of Signal indication | 3rd | 7 |
9 | RS1 | No connection required | 3rd | 8 |
10 | VeeR | Receiver Ground | 1st | 1 |
11 | VeeR | Receiver Ground | 1st | 1 |
12 | RD- | Receiver Inverted DATA out. AC Coupled. CML-O | 3rd | 9 |
13 | RD+ | Receiver Non-inverted DATA out. AC Coupled. CML-O | 3rd | 9 |
14 | VeeR | Receiver Ground | 1st | 1 |
15 | VccR | Receiver Power Supply | 2nd | 10 |
16 | VccT | Transmitter Power Supply | 2nd | 10 |
17 | VeeT | Transmitter Ground |
<10G-LR-萬兆單模光模塊 10G-ZR-80KM-萬兆光模塊> 返回
菜單產品中心Product center |
0755-86654236